SI5335D-B02248-GM Overview

In order to package it as a clock IC, the Tray package is used. There is a clock generator embedded in the 24-VFQFN Exposed Pad package. This clock generator ic can sustain a maximum temperature of 260 during reflowing. As a result, frequency synthesizers can be found to contain 24 terminations. This electronic frequency generator requires a voltage of 1.8V. This component can be conveniently installed on the panel thanks to the Surface Mount. It would take a maximum supply voltage of 1.98V to operate this time clock generator. The digital clock generator incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. The supply voltage (Vsup) should be kept above 1.71V for normal operation. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. For the clock, clock generator's output frequency should not exceed 200MHz. If the ambient temperature is below -40°C, the clock PLL may not start up. The RF synthesizer features ALSO OPERATES WITH 2.5V AND 3.3V NOMINAL SUPPLY for improved clock signal output.

SI5335D-B02248-GM Features

Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5335D-B02248-GM Applications

There are a lot of Silicon Labs SI5335D-B02248-GM Clock Generators applications.

• Radar
• VSAT (Small Ground Satellite Station)
• Picocells, femtocells and small cells
• Cell phones
• Ultrasound diagnosis
• Mixed mode (analog and digital) applications
• Digital switching systems
• DVD add-on cards for multimedia PCs
• Precision auxiliary angle deflection measurement
• Microwave point-to-point systems