SI5340B-D09485-GMR Overview

Tape & Reel (TR)-method packaging is used for clock ICs. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains 44 terminations that can be found in frequency synthesizer. Basically, a voltage of 1.8V should be applied to this electronic frequency generator. It would be possible to supply this clock PLL with 1.89V of power. CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/peripheral ICs are incorporated in this digital clock generator. This frequency synthesizer requires a supply voltage above 1.71V to be safe. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. A clock generating device that produces high-quality clock output frequencies of 350MHz is available for sale. If the ambient temperature is below -40°C, the frequency generator may not start.

SI5340B-D09485-GMR Features

Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz

SI5340B-D09485-GMR Applications

There are a lot of Silicon Labs SI5340B-D09485-GMR Clock Generators applications.

• Various decoding circuits
• Electronic equipment
• Media broadcast servers
• Melting
• Signal modulation and demodulation
• MRI
• Microwave radio
• Wide area power system
• Frequency shifting decodes
• CB radios