SI5344B-D09360-GM Overview

The Tray method is used for packaging clock ICs. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. It contains 44 terminations that can be found in frequency synthesizer. A voltage of 1.8V should be applied to this electronic frequency generator. It would take a maximum supply voltage of 1.89V to operate this time clock generator. There are CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs integrated into this digital clock generator. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 1.71V. A frequency generator that runs over 85°C may cause ha85°Cards. In this clock-generating clock generator ic, a frequency of 350MHz is synthesi350MHzed for high-quality output. It is possible that this clock PLL will not start if the ambient temperature is less than -40°C.

SI5344B-D09360-GM Features

Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz

SI5344B-D09360-GM Applications

There are a lot of Silicon Labs SI5344B-D09360-GM Clock Generators applications.

• Mixed mode (analog and digital) applications
• Small signal recovery
• Simple clock clean-up circuits
• Radio receivers
• HDD recorders
• Telecommunication systems
• Reference signals to RF systems
• Local oscillators (LOs)
• Wi-Fi routers
• Radiotelephones