SI5350A-B02973-GT Overview

The Tube method is used for packaging clock ICs. Clock PLL is embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. In it, there are 10 terminations to be found. Basically, this time clock generator needs a voltage of 1.8V. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There is a maximum voltage of 1.89V for this clock generator. This time clock generator integrates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. Keeping the supply voltage for this frequency synthesizer above 1.71V is recommended for safety reasons. After the operating temperature of the frequency generators reaches 85°C, it may cause ha85°Cards. In this clock-generating clock generator ic, a frequency of 200MHz is synthesi200MHzed for high-quality output. A temperature of less than -40°C may cause this clock PLL to fail to start. There is a ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY feature on this frequency generator in order to produce a better clock signal.

SI5350A-B02973-GT Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B02973-GT Applications

There are a lot of Silicon Labs SI5350A-B02973-GT Clock Generators applications.

• Communication infrastructure
• Wireless infrastructure
• Melting
• Camera systems
• Myriad digital applications
• Televisions
• Local oscillator source in receiver
• Electronic countermeasures
• Microprocessor clock multipliers
• Media broadcast servers