SI5350A-B03451-GT Overview

As a clock IC, it uses the Tube package. In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, there is an embedded clock generator. 10 terminations can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 1.8V. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Clock generators can take up to 1.89V of power as a maximum supply voltageIncorporating CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs, this RF synthesizer features CLOCK GENERATOR, PROCESSOR SPECIFIC. A maximum voltage of 1.71V should be used for this frequency generator for safety reasons. The operating temperature should be kept below 85°C. With this clock-generating device, 200MHz of high-quality clock output frequency can be generated. A clock PLL that starts up at a lower temperature may not function. The frequency generator has a ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY feature to improve the output of clock signals.

SI5350A-B03451-GT Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B03451-GT Applications

There are a lot of Silicon Labs SI5350A-B03451-GT Clock Generators applications.

• Digital logic circuits
• Radio receivers
• Aerospace and defense
• High-frequency induction heating
• Walkie-talkies
• Modems
• Small signal recovery
• Carrier synchronization in wired communication
• Laptops
• Simple clock clean-up circuits