SI5350A-B04110-GT Overview

Tube-method packaging is used for clock ICs. The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package embeds this Clock PLL. 10 terminations can be found in frequency generators. To operate this time clock generator, 1.8V voltage should be applied. The Surface Mount allows the electrical component to be installed conveniently on the panel. The maximal supply voltage (Vsup) reaches 1.89V. RF synthesizer is comprised of CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. Keeping the supply voltage for this frequency synthesizer above 1.71V is recommended for safety reasons. It may cause ha85°Cards once the operating temperature for the device is set in excess of 85°C. The clock generator ic can synthesi200MHze a high-quality clock output frequency of 200MHz. If the ambient temperature is below -40°C, the frequency generator may not start. The RF synthesizer features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY for improved clock signal output.

SI5350A-B04110-GT Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B04110-GT Applications

There are a lot of Silicon Labs SI5350A-B04110-GT Clock Generators applications.

• Reference signals to RF systems
• Remote telemetry and instrumentation
• Modems
• Wide area power system
• Space communucation
• High-speed communication applications
• Fiber Channel
• Microprocessor clock multipliers
• Ultrasound diagnosis
• Phase modulation cellular systems