SI5350A-B04817-GTR Overview

This clock IC is packaged using the Tape & Reel (TR) method. Clock PLL is embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. 10 terminations can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 1.8V. The Surface Mount allows the electrical component to be installed conveniently on the panel. It would be possible to supply this clock PLL with 1.89V of power. The number of uPs/uCs/Peripheral IC this time clock generator incorporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. In order to maintain safety, this frequency generator should be supplied with voltages above 1.71V. It may cause ha85°Cards once the operating temperature for the device is set in excess of 85°C. For the clock, clock generator's output frequency should not exceed 200MHz. If the ambient temperature is below -40°C, the clock PLL may not start up. With ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY, this clock generator produces better clock signals.

SI5350A-B04817-GTR Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B04817-GTR Applications

There are a lot of Silicon Labs SI5350A-B04817-GTR Clock Generators applications.

• Frequency Modulation (FM) stereo decoders
• Test and instrumentation equipment
• Tracking filters
• MRI
• Symbol synchronization
• Local oscillators (LOs)
• Walkie-talkies
• Digital HDTV systems
• Picocells, femtocells and small cells
• Phase modulation cellular systems