SI5350A-B04997-GTR Overview

A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, there is an embedded clock generator. It contains 10 terminations that can be found in frequency synthesizer. The supply voltage of 1.8V allows for high efficiency. The Surface Mount allows the electrical component to be installed conveniently on the panel. This clock generator would require a maximum supply voltage of 1.89V. Incorporating CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs, this RF synthesizer features CLOCK GENERATOR, PROCESSOR SPECIFIC. The supply voltage (Vsup) should be kept above 1.71V for normal operation. As soon as the PLL's operating temperature exceeds 85°C, it may cause ha85°Cards. The clock PLL can synthesi200MHze a clock frequency of 200MHz with high quality. If the ambient temperature is below -40°C, the frequency generator may not start. This clock PLL features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY for better clock signal output.

SI5350A-B04997-GTR Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B04997-GTR Applications

There are a lot of Silicon Labs SI5350A-B04997-GTR Clock Generators applications.

• FSK demodulators
• Coherent detection of the signal
• FM demodulation networks for FM operations
• Frequency Modulation (FM) stereo decoders
• Cellular/4G
• Wi-Fi routers
• Bit synchronization
• Precision auxiliary angle deflection measurement
• Radar
• Ultrasound diagnosis