As a clock IC, it is packaged by the Tape & Reel (TR) method. In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, there is an embedded clock generator. There are 10 terminations found in the file. Basically, a voltage of 1.8V should be applied to this electronic frequency generator. The Surface Mount allows this electrical component to be easily installed on the panel. The maximum voltage this clock PLL can handle is 1.89V. The uPs/uCs/Peripheral IC clock generator incoporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. In order to maintain safety, this frequency generator should be supplied with voltages above 1.71V. The operating temperature should be kept below 85°C. With this clock-generating device, a high-quality clock output frequency of 200MHz can be produced. In temperatures lower than -40°C, this frequency generator may not start. For better clock signal output, this clock PLL is featured with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.
SI5350A-B05381-GTR Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Supply voltage of 1.8V Output clock frequency (Max) of 200MHz
SI5350A-B05381-GTR Applications
There are a lot of Silicon Labs SI5350A-B05381-GTR Clock Generators applications.