SI5350A-B05587-GT Overview

The Tube method is used for packaging clock ICs. A Clock PLL is included with the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. It contains 10 terminations that can be found in frequency synthesizer. Basically, this time clock generator needs a voltage of 1.8V. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. It would take a maximum supply voltage of 1.89V to operate this time clock generator. RF synthesizer is comprised of CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. A maximum voltage of 1.71V should be used for this frequency generator for safety reasons. If the frequency generator's operating temperature exceeds 85°C, it may pose a ha85°Card. The clock generator ic can synthesi200MHze a high-quality clock output frequency of 200MHz. If the ambient temperature is below -40°C, the clock PLL may not start up. The frequency generator has a ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY feature to improve the output of clock signals.

SI5350A-B05587-GT Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B05587-GT Applications

There are a lot of Silicon Labs SI5350A-B05587-GT Clock Generators applications.

• Threshold extension
• Mixed mode (analog and digital) applications
• MRI
• Reference signals to RF systems
• Signal frequency synthesis circuits
• Wi-Fi routers
• Fiber Channel
• Infotainment systems
• Cell phones
• Broadcast communication