SI5350A-B05783-GT Overview

A clock integrated circuit is packaged in a Tube-shaped package because it is for use as a clock. As part of the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, this clock generator is embedded. As a result, frequency synthesizers can be found to contain 10 terminations. A voltage of 1.8V should be applied to this electronic frequency generator. Thanks to the Surface Mount, this electric component can easily be installed on a panel. Approximately 1.89V is the maximum supply voltage needed by this time clock generator. There are CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs integrated into this digital clock generator. Keeping the supply voltage for this frequency synthesizer above 1.71V is recommended for safety reasons. Whenever the operating temperature for the PLL exceeds 85°C, it may become ha85°Cardous. With this clock-generating device, 200MHz of high-quality clock output frequency can be generated. If the ambient temperature is below -40°C, the clock PLL may not start up. The frequency generator has a ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY feature to improve the output of clock signals.

SI5350A-B05783-GT Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B05783-GT Applications

There are a lot of Silicon Labs SI5350A-B05783-GT Clock Generators applications.

• Clock recovery
• Reference signals to RF systems
• Clock synchronization
• Infotainment systems
• Digital switching systems
• Camera systems
• Deep space exploration
• Navigation, positioning and surveillance system for aircraft, ships and ships
• Wireless handsets
• Laptops