SI5350A-B06033-GT Overview

It is packaged using the Tube method since it is a clock IC. This clock generator is embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. As you can see, it consists of 10 terminations. Clock generator ics require a voltage of 1.8V. With the Surface Mount, it is easy to install this electric component on the panel. It would be possible to supply this clock PLL with 1.89V of power. The number of uPs/uCs/Peripheral IC this time clock generator incorporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. For safety reasons, this frequency generator's supply voltage should remain above 1.71V. The PLL may become ha85°Cardous once the operating temperature exceeds 85°C. With this clock-generating device, 200MHz of high-quality clock output frequency can be generated. If the ambient temperature is below -40°C, the frequency generator may not start. In order to provide better clock signal output, this frequency synthesizer is equipped with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.

SI5350A-B06033-GT Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B06033-GT Applications

There are a lot of Silicon Labs SI5350A-B06033-GT Clock Generators applications.

• Cell phones
• Digital HDTV systems
• Signal analyzer
• Electronic equipment
• Medical equipment
• Motor speed controls
• Bluetooth transmitters
• Bit synchronization
• Microwave radio
• Clock generation systems