SI5350A-B06872-GT Overview

It is packaged using the Tube method since it is a clock IC. A Clock PLL is included with the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. There are a total of 10 terminations in this file. The clock generator ic should be grounded with a voltage of 1.8V. Surface Mount-slots make it easy to mount this electronic component on panels. It would be possible to supply this clock PLL with 1.89V of power. The digital clock generator incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. It is safe to use this frequency synthesizer with a supply voltage above 1.71V. The operating temperature should be kept below 85°C. Synthesi200MHzing a clock output frequency of 200MHz is possible with this clock-generator. Unless the ambient temperature is greater than -40°C, this clock PLL may not start. For better clock signal output, this clock PLL is featured with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.

SI5350A-B06872-GT Features

Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B06872-GT Applications

There are a lot of Silicon Labs SI5350A-B06872-GT Clock Generators applications.

• Local oscillators (LOs)
• Main oscillator in receiver
• Cellular/4G
• Threshold extension
• Computers to manage memory cards
• Signal demodulation
• Carrier synchronization in wired communication
• Integrated phase noise in aerospace systems
• CB radios
• Microwave radio