SI5350A-B07897-GMR Overview

Tape & Reel (TR)-method packaging is used for clock ICs. The 20-VFQFN Exposed Pad package contains this clock generator. It contains 20 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 1.8V. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 1.89V. This time clock generator integrates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. For safety reasons, this frequency synthesizer should have a voltage supply above 1.71V. As soon as the PLL's operating temperature exceeds 85°C, it may cause ha85°Cards. The clock generator ic can synthesi200MHze a high-quality clock output frequency of 200MHz. If the ambient temperature is below -40°C, the clock PLL may not start up. This clock PLL features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY for better clock signal output.

SI5350A-B07897-GMR Features

Available in the 20-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5350A-B07897-GMR Applications

There are a lot of Silicon Labs
SI5350A-B07897-GMR Clock Generators applications.

• Automatic test equipment
• Wide area power system
• Digital circuits
• Wireless base station for LTE, LTE-advanced
• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks
• Line cards used in telephone exchange