The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -55°C~125°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 2 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. An electrical component of this type can be found in the 16 series. A SPDT switching circuit is used to build these analog multiplexers. 3 circuits are used in this analogue multiplexer. Using the HCF4053 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 1.05kOhm. For functions related to 16 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 20V to the switch device in normal circumstances. Analogue multiplexers of the Dual supply type that are cost-effective. 3V is the lowest voltage the electrical component should receive. For this multiplexer to operate, 80nA current would be sufficient. Analogue multiplexers require a 3V~20V voltage to drain from a single voltage supply. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. The 6 inputs need to be operated in order to work. 60MHz-bandwidths can be used to transfer data between multiplexers.
HCF4053M013TR Features
2 Channels Switch Circuit: SPDT 80nA Supply Current Bandwidth: 60MHz
HCF4053M013TR Applications
There are a lot of STMicroelectronics HCF4053M013TR Analog Switches & Multiplexers ICs applications.
RGB switches
FTTH
Battery Powered Instruments
Wireless Local Loop
Video switching
Avionics
Cable Modem
Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads