L6726A Overview

In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. For 1 outputs, the dc motor controller is appropriate. Tube solid enclosure protects the pmic. There are Transistor Driver dc switching's output (s) that it can handle. Voltages 4.1V~13.2V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~150°C TJ. dc dc regulators can be carried out with Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Phase Control, Power Good. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. Various 8 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis 12V volts. Searching "L6726" will return other relevant dc to dc converter ics. There are 8 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. An input voltage of 5V is the minimum required for the dc dc voltage regulator. DC regulator outputs 800mV voltage based on test statistics. In most cases, the output current of the dc dc regulator will be 1.5A, so note that when you start the project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 80 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Switching controller operates at 270kHz Hz. Components may be damaged if their current is greater than 6mA.

L6726A Features

Transistor Driver Outputs
Enable, Frequency Control, Phase Control, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
Frequency: 270kHz

L6726A Applications

There are a lot of STMicroelectronics L6726A DC to DC converter applications.

• seismic instrument power circuits
• Lathes
• Packaging
• Textile machinery
• Flaw detection equipment
• Constant current circuits
• Surge protection circuits
• Automatic testing equipment
• Cutting machine tools
• Combined machine tools