M74HC4051RM13TR Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a number of circuits 8:1. The operating temperature is extended to around -55°C~125°C TA. The total number of terminations is 16. A electrical component with 8 channels is capable of high-quality output. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. A 1 circuit is present in this switch device. Use M74HC405 to search for variants of the digital switches. It has an internal resistance of 100Ohm. To find out what the 16 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. A voltage higher than 6V should not normally be supplied to the switches. Analog switch ics with Dual supply type are cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 8μA. There is no problem with using dual supply voltage, but it should not exceed 6V. You should attach at least 1V voltage if you are using dual power supply. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. In order to operate the 8 inputs, there are several steps to follow. A 120MHz-bandwidth can be used for data transfer.

M74HC4051RM13TR Features

8 Channels
8μA Supply Current
-3db Bandwidth: 200MHz
Bandwidth: 120MHz

M74HC4051RM13TR Applications

There are a lot of STMicroelectronics M74HC4051RM13TR Analog Switches & Multiplexers ICs applications.

• Cable PC
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• SONET
• Microprocessor Controlled Analog Systems
• ATM
• Relay Replacement
• HDTV
• Channelized and Unchannelized DS3 applications
• Medical systems
• PDAs