This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 4:1. Operating temperature extended to -55°C~125°C TA. The total number of terminations is 16. High-quality output is provided by the electronic component's 4 channels. Turning on and running the electrical part should be easy with a 4.5V voltage supply. An electrical component of this type can be found in the 16 series. A SP4T switching circuit is used to build these analog multiplexers. There are 2 circuits in this switch device. M74HC405 can be used to search for analog multiplexer variants. A 100Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 16 pins functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 6V in normal situations. Digital switch that provides Dual power at a cost-effective price. It is recommended to use 2V as the lowest voltage for the electrical part. This multiplexer would work with 8μA current. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. The voltage should be at least 1V if you are using dual power supplies. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. There are 8 inputs to be operated. There are 120MHz bandwidths for data transfer.