SR1PARU Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. Power management is packaged in a Cut Tape (CT) way. There are 1 functions included in this PMIC so that you can refer to them. In this IC management you will find 6-UDFN functions for you to refer to. Several of the benefits of this PMIC are also shared by other Reset Timer products. IC management is possible to find a succession of 1 voltages that have been checked. The power management is mounted by a Surface Mount-axis. There are 6 pins on the power managment ic. It is recommended that Vsup should not be less than 2V for this IC power. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Surface Mount mounting is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. A similar IC managements number of the manufacturer can always be found by using SR1, the base power ics number. As you can see, this IC power comes from the well-known Smart Reset? series of products.

SR1PARU Features

Reset Timer type
Minimum supply voltage of 2V

SR1PARU Applications

There are a lot of STMicroelectronics SR1PARU Voltage Supervisors applications.

• Radar
• Radio
• Fire equipment power monitoring system
• Utility meter
• Smartphones
• Cloud computing
• Detection of phase loss
• Microprocessor system
• Battery cars
• Electronics installed in the vehicle