STG4210QTR Overview

This electronic part is conveniently packaged in 10-UFQFN, making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Around -40°C~85°C TA is the extended operating temperature. Totally, there are 10 terminations. The electronic part delivers high-quality output through its 1 channels. An 1.8V voltage supply should allow the electrical part to be turned on and run. This electronic part can be found in the 10 series. The analog switch ics are built using SPST - NO switching circuits. Try searching for STG4210 variants of the analog switch ic. This digital multiplexer has 2.9Ohm internal resistance. The datasheets for the 10 pins explain the functions. There is Multiplexer or Switches analog multiplexer like this in the world. An abnormal situation would be for the switch device to be supplied with a voltage greater than 4.3V. The digital multiplexer has a low cost Single supply. The lowest voltage fed to the electronic component should be 1.65V. This digital switch can be operated with a current of 50nA. This analogue multiplexer requires a voltage of 1.65V~4.3V when it drains from a single voltage supply. Putting voltage greater than 50nA on the multiplexer may cause damage. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. There is a voltage range of 3V operating voltages for the electrical part. It is possible to operate 2 inputs.

STG4210QTR Features

1 Channels
Switch Circuit: SPST - NO
50nA Supply Current
-3db Bandwidth: 58MHz

STG4210QTR Applications

There are a lot of STMicroelectronics STG4210QTR Analog Switches & Multiplexers ICs applications.

• Medical
• Frame Relay Equipment
• Avionics and Military Systems
• 65 V DACs
• SONET/SDH ADM
• Signal routing between systems
• High speed data transmission line cards
• Multiplexers
• Data Acquisition Systems
• Data switching