DG405BDY-T1-E3 Overview

This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. The advanced packaging method Tape & Reel (TR) provides high reliability. Mounted in Surface Mount is this multiplexer. 1:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. In total, there are 16 terminations. A electrical component with 2 channels is capable of high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. Into the electrical component body are injected 16 pins. Multiplexers built on a SPST - NO switching circuit are built. Try searching for DG405 variants of the analog switch ic. As far as internal resistance is concerned, it has 55Ohm. The datasheets for the 16 pins explain the functions. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 36V. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 13V. It would be sufficient to run this analogue multiplexer with 1mA current. If you put voltage higher than 500μA on the digital multiplexer, damage may occur. Despite this switch device's dual supply capability, its voltage should not exceed 22V. You should attach at least 7V voltage if you are using dual power supply. With a DPST analog IC integrated into the board. 15V operating voltages can be used with this electrical part. Multiplexer ics with 4 outputs are available.

DG405BDY-T1-E3 Features

2 Channels
Switch Circuit: SPST - NO
1mA Supply Current

DG405BDY-T1-E3 Applications

There are a lot of Vishay Siliconix DG405BDY-T1-E3 Analog Switches & Multiplexers ICs applications.

• Relay replacements
• Fiber In The Loop (FITL)
• Audio signal routing
• Ultrasound
• Communication systems
• Channel Banks
• High-Voltage
• Cellular phones
• Audio and video routing
• MP3 players