STM1061N25WX6F Overview

There are 3 terminals on this power management that allow it to be mounted. Power management is packaged in a Tape & Reel (TR) way. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. As a reference, this IC power includes TO-236-3, SC-59, SOT-23-3 functions for your convenience. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by a Surface Mount-axis. It is possible to subcategorize this power ic as a Power Management Circuits chip. 3 pins are present in total in this power management. 3 pins are present on the power management system. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 700mV. There should be no more than 6V volts of supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. The supply current of the power management is 3.6μA. For similar manage ics search of the manufacturer, you can always refer to STM1061, the base PMIC number. The maximum supply temperature is 3.6μA.

STM1061N25WX6F Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current

STM1061N25WX6F Applications

There are a lot of STMicroelectronics STM1061N25WX6F Voltage Supervisors applications.

• Automotive permanent magnet synchronous motors
• Dash board
• Detection of phase loss
• Radio
• Telecommunications equipment
• Military communications
• Personal computers
• Network equipment
• emergency room
• DC stabilized power supply module