STM6321MWY6F Overview

This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. There is a Tape & Reel (TR)-packaging method applied to IC management. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount is the one that mounts power management. A IC power such as this can be classified as a Power Management Circuits power management system. Taking into account all of the pins, this power management has a total of 5. 5 pins are on the supervisor. IC management can only work with a supply voltage of 1V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain, Push-Pull. Supplied with a operating current of 17μA, this PMIC is capable of fully function as specified. It is always advisable to use STM6321, the base supervisor number, when searching for similar PMICs from the manufacturer. At the most, voltage supervisor can work with a supply temperature of 17μA.

STM6321MWY6F Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
17μA operating supply current

STM6321MWY6F Applications

There are a lot of STMicroelectronics STM6321MWY6F Voltage Supervisors applications.

• Precision measurement
• Display equipment
• Radar
• Set top box
• Digitally controlled LDO regulators circuit
• Medical-specific insulation monitor
• Power communication system
• Computer applications
• Microprocessor system
• Unattended substation automation