STM6717SFWY6F Overview

As you can see, this power management is mounted through 5 terminals. Power management is packaged in a Tape & Reel (TR) way. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. IC management is specified that the package peak reflow temperature should be 260. Manage ics operate at 3.3V supply voltages. Power management conducts at a voltage of 2. The power management is mounted by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 5 pins on power management. This power management has 5 pins. It is recommended that Vsup should not be less than 800mV for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 35μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using STM6717, the base power ics number. At the most, voltage supervisor can work with a supply temperature of 35μA.

STM6717SFWY6F Features

Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
35μA operating supply current

STM6717SFWY6F Applications

There are a lot of STMicroelectronics STM6717SFWY6F Voltage Supervisors applications.

• Power distribution systems of operating room
• Detection of phase imbalance
• Precision measurement
• Efficient information transmission
• Magnetic resonance imaging
• Military electronics
• Stable power system
• DSP
• Cloud computing
• Insulation fault location system