STM690AM6E Overview

There are 8 terminals on this power management that allow it to be mounted. It is packaged with Tube. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. When a supply voltage of 5V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 8 pins on the board. 8 pins are on the supervisor. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. The supply current of the power management is 60μA. To find similar IC managements from the manufacturer, you can always search by STM690. It requires 5V watts of power to operate this voltage supervisor.

STM690AM6E Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

STM690AM6E Applications

There are a lot of STMicroelectronics STM690AM6E Voltage Supervisors applications.

• Dash board
• Battery cars
• Insulation fault location system
• Urban rail transit weak current power monitoring
• Solar power charger
• Battery cars
• Digitally controlled LDO regulators circuit
• Radar
• Power distribution systems of CCU
• FPGA design