STM810LWX6F Overview

There are 3 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Cut Tape (CT) model. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. There are a total of 3 pins on power management. This power management system has 3 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The supervisor's supply current is specified to 15μA. To find similar IC managements from the manufacturer, you can always search by STM810. The maximum supply temperature that PMIC chip can work with is 15μA.

STM810LWX6F Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current

STM810LWX6F Applications

There are a lot of STMicroelectronics STM810LWX6F Voltage Supervisors applications.

• Automotive permanent magnet synchronous motors
• Smartphones
• Multi-voltage system
• Medical-specific isolation transformer
• Urban rail transit weak current power monitoring
• DVR
• Power distribution systems of operating room
• Radio
• Telecommunications equipment
• emergency room