STM813LM6E Overview

It is mounted through 8 terminals on the power management. It is packaged with Tube. Please refer to this PMIC for 1 functions. Power management consists of 1 channels, each of which can be used independently. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When 5V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. By Surface Mount, IC management has been mounted. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 8. There are 8 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type for IC management is Surface Mount. Temperature setting for the supervisors should be -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 60μA. For similar manage ics search of the manufacturer, you can always refer to STM813, the base PMIC number. Voltage supervisor can work with a supply temperature of 60μA at the most.

STM813LM6E Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

STM813LM6E Applications

There are a lot of STMicroelectronics STM813LM6E Voltage Supervisors applications.

• Household appliances
• Unattended substation automation
• Power distribution systems of operating room
• Magnetic resonance imaging
• Medical-specific insulation monitor
• Display equipment
• Personal computers
• Battery cars
• Insulation fault location system
• Dash board