TS942AIN Overview
A 8-DIP (0.300, 7.62mm) case is used to package the op amp. This is a General Purpose type op amp. Linear amplifier is delivered in a Tube case. An 8-pin op amp ic is included in the package. There is an input offset voltage of 5mV for this buffer op amp. This electronic part is recommended for mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. An 1.2μA volt supply current is needed for this linear amplifier to operate. The voltage gain should stay at 100dB. In total, there are 2 circuits on this buffer amplifier. On the buffer amps, there are 2 channels that can be used. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. To operate this buffer amplifier, the temperature must not be lower than -40°C. You should not use op amp above 85°C . For the operating supply voltage of the op amp ic, there is a rating of 2. It is recommended that this electronic component be used with an 1.2μA supply. Under 10V is the minimum supply voltage for this electric component. To keep the buffer amps' supply voltage higher than 2.5V.
TS942AIN Features
100dB voltage gain
Output Type: Rail-to-Rail
TS942AIN Applications
There are a lot of STMicroelectronics TS942AIN Instrumentational OP Amps applications.
- Communication device
- Car stereo
- Professional videography
- High gain DC amplifier
- Television broadcasting equipment
- Navigation
- Industrial applications including automation
- RF cable systems
- Fission chambers
- Broadcasting
