Name: VND10N06-E
Brand: STMicroelectronics
SKU: VND10N06-E
Availability: InStock

new-10%

VND10N06-E

Manufacturer part number:VND10N06-E

Manufacturer:STMicroelectronics

Description:N-Channel 2.28mm PMIC OMNIFET?, VIPower? Series VND10 3 Pin TO-252-3, DPak (2 Leads + Tab), SC-63

Case Package:SOT-23

Datasheet:VND10N06-E Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	20 Weeks
Lifecycle Status	ACTIVE (Last Updated: 6 months ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	TO-252-3, DPak (2 Leads + Tab), SC-63
Number of Pins	3
Packaging	Tube
Series	OMNIFET™, VIPower™
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	2
Resistance	150mOhm
Max Power Dissipation	35W
Terminal Position	SINGLE
Terminal Form	GULL WING
Number of Functions	1
Terminal Pitch	2.28mm
Base Part Number	VND10
JESD-30 Code	R-PSSO-G2
Number of Outputs	1
Output Type	N-Channel
Max Output Current	10A
Interface	On/Off
Nominal Supply Current	150μA
Output Configuration	Low Side
Power Dissipation	35W
Output Current	6A
Voltage - Supply (Vcc/Vdd)	Not Required
Max Supply Current	150μA
Input Type	Non-Inverting
Turn On Delay Time	1.1 μs
Switch Type	General Purpose
Turn-Off Delay Time	200 ns
Continuous Drain Current (ID)	10A
Ratio - Input:Output	1:1
Fault Protection	Current Limiting (Fixed), Over Temperature, Over Voltage
Drain to Source Breakdown Voltage	60V
Output Peak Current Limit-Nom	10A
Rds On (Typ)	150m Ω
Drain to Source Resistance	150mOhm
Built-in Protections	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL
Height	2.4mm
Length	6.6mm
Width	6.2mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

VND10N06-E Product Details

VND10N06-E Overview

As a result, it is packaged in the form of a Tube.The TO-252-3, DPak (2 Leads + Tab), SC-63 package contains it.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type that it owns.The LED driver is equipped with 1 outputs.The LED driving board operates with a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.There is a VND10 family of things that it belongs to.In total, there are 2 terminations.The operation is carried out using the 3 pins.It contains 1 functions.This operation requires the maximum output current to be decreased to 10A.Surface Mount is mounted in the way of this LED driving board.It has a resistance of 150mOhm.A component of this type is included in the OMNIFET?, VIPower? series.This results in a 6A output current.It has a maximum current requirement of 150μA.