1P1G3157QDCKRQ1 Overview

Presented in 6-TSSOP, SC-88, SOT-363, this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Cut Tape (CT). Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 2:1. Increasing operating temperature to around -40°C~125°C TA. Totally, there are 6 terminations. A high-quality output is provided by the electrical component's 1 channels. It is safe to turn on and run the electronic component with a 2.3V voltage supply. A total of 6 pins are injected into the electrical part body. A SPDT switching circuit is used for these analog switches. Using the 1G3157 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 15Ohm. For details about the functions of 6 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The digital multiplexer has a low cost Single supply. 1.65V is the lowest voltage the electrical component should receive. For this digital switch to work, 1μA current would suffice. An analogue multiplexer drains from a single voltage supply at 1.65V~5.5V. Putting voltage greater than 10μA on the multiplexer may cause damage. The 1 inputs need to be operated in order to work. The data can be transferred over a wide range of bandwidths, called 300MHz bandwidths. A Drain to Source resistance of 15Ohm is shown for this electronic part. In this digital multiplexer, there are 2 outputs. It is capable of carrying out 2-bit operation. The Automotive, AEC-Q100 series is responsible for it.

1P1G3157QDCKRQ1 Features

1 Channels
Switch Circuit: SPDT
1μA Supply Current
Bandwidth: 300MHz
Drain-to-Source resistance: 15Ohm
2-Bit

1P1G3157QDCKRQ1 Applications

There are a lot of Texas Instruments
1P1G3157QDCKRQ1 Analog Switches & Multiplexers ICs applications.

• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• New designs requiring multiplexer functions
• Cellular phones