74AC16374DLR Overview

48-BSSOP (0.295, 7.50mm Width)is the packaging method. You can find it in the Cut Tape (CT)package. The output it is configured with uses Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. There is an electric part mounted in the way of Surface Mount. It operates with a supply voltage of 3V~5.5V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. D-Typedescribes this flip flop. JK flip flop is a part of the 74ACseries of FPGAs. You should not exceed 100MHzin the output frequency of the device. A total of 2 elements are present. A total of 48terminations have been recorded. You can search similar parts based on 74AC16374. Power is supplied from a voltage of 5V volts. Its input capacitance is 3pF farads. Devices in the ACfamily are electronic devices. It is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 48. This device has the clock edge trigger type of Positive Edge. The RS flip flops belongs to Bus Driver/Transceiver base part number. This flip flop is designed with 16 Bits. For normal operation, the supply voltage (Vsup) should be kept above 3V. Considering its reliability, this T flip flop is well suited for TR. The D flip flop is embedded with 2ports. Optimal efficiency requires a supply voltage of 5V. As a result of its output current of 24mA, it is very flexible in terms of design. The JK flip flop is with 3 output lines to operate. There is 8μA quiescent current consumption by it.

74AC16374DLR Features

Cut Tape (CT) package
74AC series
48 pins
16 Bits

74AC16374DLR Applications

There are a lot of Texas Instruments 74AC16374DLR Flip Flops applications.

• Shift registers
• Storage registers
• Dynamic threshold performance
• Asynchronous counter
• Differential Individual
• Consumer
• High Performance Logic for test systems
• Pattern generators
• Latch
• Single Down Count-Control Line