SN74HC74PW Overview

14-TSSOP (0.173, 4.40mm Width)is the packaging method. The package Tubecontains it. Currently, the output is configured to use Differential. It is configured with the trigger Positive Edge. Surface Mountis in the way of this electric part. With a supply voltage of 2V~6V volts, it operates. In the operating environment, the temperature is -40°C~85°C TA. The type of this D latch is D-Type. FPGAs belonging to the 74HCseries contain this type of chip. It should not exceed 60MHzin terms of its output frequency. There is a consumption of 4μAof quiescent energy. It has been determined that there have been 14 terminations. You can search similar parts based on 74HC74. Power is supplied from a voltage of 5V volts. The input capacitance of this JK flip flopis 3pF farads. An electronic device belonging to the family HC/UHcan be found here. There is an electronic component mounted in the way of Surface Mount. It is designed with 14 pins. A Positive Edgeclock edge trigger is used in this device. There is a FF/Latchesbase part number assigned to the RS flip flops. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. The supply voltage (Vsup) should be kept above 2V for normal operation. For high efficiency, the supply voltage should be set to 5V. It offers maximum design flexibility with its output current of 5.2mA. The number of input lines is 4. A total of 2 channels are available.

SN74HC74PW Features

Tube package
74HC series
14 pins

SN74HC74PW Applications

There are a lot of Texas Instruments SN74HC74PW Flip Flops applications.

• Bounce elimination switch
• Buffer registers
• Counters
• Patented noise
• Data transfer
• Convert a momentary switch to a toggle switch
• Reduced system switching noise
• Differential Individual
• ESCC
• Balanced 24 mA output drivers