Name: 74ACT11374NSRG4
Brand: Texas Instruments
SKU: 74ACT11374NSRG4
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	24-SOIC (0.209, 5.30mm Width)
Number of Pins	24
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Series	74ACT
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
Type	D-Type
Subcategory	FF/Latches
Packing Method	TAPE AND REEL
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Supply Voltage	5V
[email protected] Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74ACT11374
Function	Standard
Qualification Status	Not Qualified
Output Type	Tri-State, Non-Inverted
Number of Elements	1
Polarity	Non-Inverting
Supply Voltage-Max (Vsup)	5.5V
Power Supplies	5V
Supply Voltage-Min (Vsup)	4.5V
Load Capacitance	50pF
Number of Ports	2
Number of Bits	8
Clock Frequency	70MHz
Propagation Delay	11.3 ns
Turn On Delay Time	8.5 ns
Family	ACT
Logic Function	D-Type, Flip-Flop
Current - Quiescent (Iq)	8μA
Output Characteristics	3-STATE
Current - Output High, Low	24mA 24mA
Max Propagation Delay @ V, Max CL	11.3ns @ 5V, 50pF
Trigger Type	Positive Edge
Input Capacitance	4pF
Number of Input Lines	8
Clock Edge Trigger Type	Positive Edge
Max [email protected]	55000000Hz
Height Seated (Max)	2mm
Width	5.3mm
RoHS Status	ROHS3 Compliant

74ACT11374NSRG4 Product Details

74ACT11374NSRG4 Overview

24-SOIC (0.209, 5.30mm Width)is the packaging method. The package Tape & Reel (TR)contains it. Tri-State, Non-Invertedis the output configured for it. Positive Edgeis the trigger it is configured with. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at a voltage of 4.5V~5.5V. A temperature of -40°C~85°C TAis considered to be the operating temperature. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74ACTseries contain this type of chip. This D flip flop should not have a frequency greater than 70MHz. A total of 1 elements are present. As a result, it consumes 8μA quiescent current. A total of 24terminations have been recorded. D latch belongs to the 74ACT11374 family. It is powered from a supply voltage of 5V. The input capacitance of this JK flip flopis 4pF farads. ACTis the family of this D flip flop. The electronic part is mounted in the way of Surface Mount. A total of 24pins are provided on this board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. This flip flop is designed with 8 Bits. 5.5Vis the maximum supply voltage (Vsup). A normal operating voltage (Vsup) should remain above 4.5V. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. The D latch operates on 5V volts. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It has 8lines.