74ACT16823DL Overview

It is embeded in 56-BSSOP (0.295, 7.50mm Width) case. D flip flop is embedded in the Tube package. It is configured with Tri-State, Non-Invertedas an output. This trigger uses the value Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. This electronic flip flop is of type D-Type. FPGAs belonging to the 74ACTseries contain this type of chip. You should not exceed 90MHzin its output frequency. D latch consists of 2 elements. The number of terminations is 56. The 74ACT16823family includes it. It is powered by a voltage of 5V . A 3pFfarad input capacitance is provided by this T flip flop. ACTis the family of this D flip flop. Electronic part Surface Mountis mounted in the way. A total of 56pins are provided on this board. This device's clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. An electronic part with 18bits has been designed. In order to achieve its superior flexibility, 1 circuits are used. The D latch operates on 5V volts. This flip flop has a total of 2ports. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. The 24mA output current allows it to be designed with the greatest amount of flexibility. In order to operate, the chip has 3 output lines. It consumes 8μA of quiescent current without being affected by external factors. Additionally, you may refer to the additional WITH CLEAR AND CLOCK ENABLE of the electronic flip flop.

74ACT16823DL Features

Tube package
74ACT series
56 pins
18 Bits
5V power supplies

74ACT16823DL Applications

There are a lot of Texas Instruments 74ACT16823DL Flip Flops applications.

• Test & Measurement
• Load Control
• ATE
• Frequency Divider circuits
• Individual Asynchronous Resets
• ESCC
• Buffered Clock
• Patented noise
• Balanced 24 mA output drivers
• Latch