74AHCT16374DGGRG4 Overview
TSSOPis the packaging method. The Tape and Reelpackage contains it. A total of 48terminations have been recorded. A voltage of 5V provides power to the D latch. It belongs to the family of electronic devices known as AHCT/VHCT/VT. There is an electronic part that is mounted in the way of Surface Mount. The 48pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. It is designed with 16bits. The superior flexibility of this circuit is achieved by using 2 circuits. A total of 5V power supplies are needed to run it. This flip flop has a total of 2ports. Optimal efficiency requires a supply voltage of 5V. A total of 8input lines have been provided. Quiescent current is consumed by the D latch in the amount of 4μA. A -8mAvalue is set for the high level output current. 8mA is the low level output current. A temperature below 85°Cis recommended for operation. It is recommended that the operating temperature be greater than -40°C. Despite its minimal supply voltage of 4.5V, it is capable of operating. 5.5Vis the maximum supply voltage it supports. We are able to achieve a frequency of 140MHz. The logic IC it uses is BUS DRIVER. As a result, it is equipped with 2 functions . This device is equipped with a pin count of 48.
74AHCT16374DGGRG4 Features
Tape and Reel package
48 pins
16 Bits
5V power supplies
2 Functions
48 pin count
74AHCT16374DGGRG4 Applications
There are a lot of Texas Instruments
74AHCT16374DGGRG4 Flip Flops applications.
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
