74ALVCH162721GRE4 Overview
As a result, it is packaged as TSSOP. The package Tape & Reel (TR)contains it. There are 1 elements in it. In 56terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The power supply voltage is 1.8V. It is a member of the ALVC/VCX/Afamily of D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 56. Its clock edge trigger type is Positive Edge. The part is included in FF/Latches. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. There are 2 ports embedded in the flip flops. It is designed with 3 output lines. As a result, it consumes 40μA of quiescent current without being affected by external factors. High level output current is set to -12mA. Low level output current is set to 12mA. A temperature below 85°Cshould be used for operation. Ideally, the operating temperature should be greater than -40°C. The minimal supply voltage is 1.65V. The maximum supply voltage supported by the flip flop is 3.6V. It is possible to achieve a frequency of 150MHz. It adopts a logic IC of type BUS DRIVER. The T flip flop is equipped with 1functions . The JK flip flop has a pin count of 56. 12mA provides maximum design flexibility due to its output current.
74ALVCH162721GRE4 Features
Tape & Reel (TR) package
56 pins
1 Functions
56 pin count
74ALVCH162721GRE4 Applications
There are a lot of Texas Instruments
74ALVCH162721GRE4 Flip Flops applications.
- Computers
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
