74ALVCH16374DLG4 Overview
The package is in the form of SSOP. 48terminations have occurred. It is powered by a voltage of 1.8V . A device of this type belongs to the family of ALVC/VCX/A. It is mounted in the way of Surface Mount. There are 48pins on it. The clock edge trigger type for this device is Positive Edge. An electronic part with 16bits has been designed. In order to achieve its superior flexibility, 2 circuits are used. The flip flop contains 2ports. There are no output lines on the JK flip flop. 8input lines are available for you to choose from. There is 40μA quiescent current consumption by it. A high level output current of -24mAis set. In the low level output current setting, the current is set to 24mA. Ideally, the operating temperature should be below 85°C. If the operating temperature is higher than -40°C, the system should operate properly. In order for it to operate, a supply voltage of 1.65Vis required. A maximum voltage of 3.6V can be provided by it. This frequency can be achieved at 150MHz. There is a logic IC BUS DRIVER used in the D flip flop. It has 2 functions. 48pins are available on this JK flip flop. With an output current of 24mA, this flip flop offers maximum design flexibility.
74ALVCH16374DLG4 Features
48 pins
16 Bits
2 Functions
48 pin count
74ALVCH16374DLG4 Applications
There are a lot of Texas Instruments
74ALVCH16374DLG4 Flip Flops applications.
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
