SN74F175DRE4 Overview
The package is in the form of SOIC. As part of the package Tape & Reel (TR), it is embedded. In the configuration, TTLis used as the output. The element count is 1 . 16terminations have occurred. It is powered by a voltage of 5V . A device of this type belongs to the family of F/FAST. It is mounted in the way of Surface Mount. There are 16pins on it. The clock edge trigger type for this device is Positive Edge. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. A power supply of 5Vis required to operate it. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. A high level output current of -1mAis set. In the low level output current setting, the current is set to 20mA. Ideally, the operating temperature should be below 70°C. If the operating temperature is higher than 0°C, the system should operate properly. In order for it to operate, a supply voltage of 4.5Vis required. A maximum voltage of 5.5V can be provided by it. This frequency can be achieved at 140MHz. There is a logic IC D FLIP-FLOP used in the D flip flop. It has 4 functions. 16pins are available on this JK flip flop. With an output current of 20mA, this flip flop offers maximum design flexibility.
SN74F175DRE4 Features
Tape & Reel (TR) package
16 pins
5V power supplies
4 Functions
16 pin count
SN74F175DRE4 Applications
There are a lot of Texas Instruments
SN74F175DRE4 Flip Flops applications.
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
