Welcome to Hotenda.com Online Store!

logo
userjoin
Home

74FCT162374TPVCG4

74FCT162374TPVCG4

74FCT162374TPVCG4

Texas Instruments

4.5V~5.5V 8 Bit D-Type Flip Flop DUAL 74FCT162374 48 Pins 500μA 74FCT Series 48-BSSOP (0.295, 7.50mm Width)

SOT-23

74FCT162374TPVCG4 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-BSSOP (0.295, 7.50mm Width)
Number of Pins 48
Operating Temperature-40°C~85°C TA
PackagingTube
Series 74FCT
Pbfree Code yes
Part StatusObsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 48
Type D-Type
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Supply Voltage 5V
Terminal Pitch0.635mm
[email protected] Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74FCT162374
Function Standard
Qualification StatusNot Qualified
Output Type Tri-State, Non-Inverted
Number of Elements 2
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies5V
Supply Voltage-Min (Vsup) 4.5V
Number of Circuits 1
Load Capacitance50pF
Number of Ports2
Output Current24mA
Number of Bits 8
Propagation Delay10 ns
Turn On Delay Time2 ns
Family FCT
Current - Quiescent (Iq) 500μA
Output Characteristics 3-STATE WITH SERIES RESISTOR
Current - Output High, Low 24mA 24mA
Trigger Type Positive Edge
Input Capacitance4.5pF
Number of Output Lines 8
Clock Edge Trigger Type Positive Edge
Width 7.49mm
RoHS StatusROHS3 Compliant
In-Stock:4765 items

74FCT162374TPVCG4 Product Details

74FCT162374TPVCG4 Overview


The flip flop is packaged in 48-BSSOP (0.295, 7.50mm Width). There is an embedded version in the package Tube. There is a Tri-State, Non-Invertedoutput configured with it. It is configured with a trigger that uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. A temperature of -40°C~85°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. In this case, it is a type of FPGA belonging to the 74FCT series. In total, it contains 2 elements. As a result, it consumes 500μA quiescent current. A total of 48terminations have been recorded. JK flip flop belongs to 74FCT162374 family. A voltage of 5V is used to power it. The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of FCT. There is an electronic part mounted in the way of Surface Mount. There are 48pins on it. This device's clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. The flip flop is designed with 8bits. Vsup reaches 5.5V, the maximal supply voltage. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. The superior flexibility of this circuit is achieved by using 1 circuits. An electrical current of 5V volts is applied to it. A total of 2ports are embedded in the D flip flop. This T flip flop features a maximum design flexibility due to its output current of 24mA. It operates with 8 output lines.

74FCT162374TPVCG4 Features


Tube package
74FCT series
48 pins
8 Bits
5V power supplies

74FCT162374TPVCG4 Applications


There are a lot of Texas Instruments 74FCT162374TPVCG4 Flip Flops applications.

  • Load Control
  • Data Synchronizers
  • Bus hold
  • Shift registers
  • Patented noise
  • Dynamic threshold performance
  • Frequency division
  • Divide a clock signal by 2 or 4
  • Instrumentation
  • Circuit Design

Get Subscriber

Enter Your Email Address, Get the Latest News