SN74ALS564BDWRE4 Overview
It is embeded in 20-SOIC (0.295, 7.50mm Width) case. It is contained within the Tape & Reel (TR)package. As configured, the output uses Tri-State, Inverted. This trigger uses the value Positive Edge. Surface Mountis occupied by this electronic component. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is at 0°C~70°C TAdegrees Celsius that the system is operating. Logic flip flops of this type are classified as D-Type. It is a type of FPGA belonging to the 74ALS series. You should not exceed 30MHzin the output frequency of the device. A total of 1elements are contained within it. This process consumes 18mA quiescents. Terminations are 20. D latch belongs to the 74ALS564 family. A voltage of 5V is used as the power supply for this D latch. It belongs to the family of electronic devices known as ALS. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. A Positive Edgeclock edge trigger is used in this device. This RS flip flops is a part number FF/Latches. Vsup reaches 5.5V, the maximal supply voltage. The supply voltage (Vsup) should be maintained above 4.5V for normal operation. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. A power supply of 5Vis required to operate it. A D flip flop with 2embedded ports is available. This T flip flop features a maximum design flexibility due to its output current of 24mA. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.
SN74ALS564BDWRE4 Features
Tape & Reel (TR) package
74ALS series
20 pins
5V power supplies
SN74ALS564BDWRE4 Applications
There are a lot of Texas Instruments SN74ALS564BDWRE4 Flip Flops applications.
- Dynamic threshold performance
- CMOS Process
- Differential Individual
- Latch-up performance
- Load Control
- Latch
- Data storage
- Data transfer
- Patented noise
- Power down protection
