74LVCH16541ADGGRE4 Overview
There is a neat TSSOP package used in buffer. A Tape and Reel external packaging is used for this buffer. A total of 2 elements are used. 48 terminations with different functions are available on this transceiver. An input voltage of 1.8V is required. LVC/LCX/Z family part. With the electrical part, 48 pins are set. Surface Mount applications are suitable for it. There are 48 pins on digital buffer. The bus transceiver has 2 ports. For each element, there are 8 bits. When the electronic component is quiescent, it uses 20μA. Power supplies with a 3.3V volt rating are recommended. For better service, buffer includes WITH DUAL OUTPUT ENABLE. As low as -40°C can be tolerated by it. You shouldn't let the amibient temperature get higher than 85°C when using this buffer. It outputs 24mA when it is in low-level mode, which is the default. There is a possibility of the electronic component conducting -24mA of current when it is in high-level output mode. It is recommended that the voltage used to run this electrical component is at least 1.65V. It is rated for a maximum supply voltage of 3.6V. Signal transmission is more cost-effective with its 16 lines level input capability. ICs that use BUS DRIVER logic are known as BUS DRIVER logic transceivers. ENABLE LOW control technology allows the logical driver to start up.
74LVCH16541ADGGRE4 Features
WITH DUAL OUTPUT ENABLE
High Level Output: 24mA
Low Level Output: -24mA
BUS DRIVER Logic IC
74LVCH16541ADGGRE4 Applications
There are a lot of Texas Instruments
74LVCH16541ADGGRE4 Buffers & Transceivers applications.
- Wireless modems
- Remote controls
- Wireless network systems
- Satellite communications networks
- Ethernet circuitry
- Wired telephone
- Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
