ADC0838CIWM/NOPB Overview

The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the 20-SOIC (0.295, 7.50mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 20 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 8 channels.The is equipped with 20 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The input type of this electronic AD converter is Differential, Pseudo-Differential, Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-ADC.The architecture that analogue to digital converter's core adopts is SAR.There are 20 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 4.5V~6.3V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADC0838 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Single describes the type of supply.The supply/digital voltage of this electrical AD converter is 4.5V~6.3V.Surface Mount allows the ADC converter to be mounted.The ADC converter operates with the maximal supply voltage of 6.3V.4, 8 inputs are employed.It operates with the minimal supply voltage of 4.5V.This electrical digital converter operates from a supply voltage of 5V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 15mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 10mW.The conversion rate of this electrical AD converter is calculated as 31 ksps.The ADC converter consists of 1 elements.

ADC0838CIWM/NOPB Features

1 Functions
20 basic kinds of terminations
20 pin count
Minimal supply voltage of 4.5V
1 elements

ADC0838CIWM/NOPB Applications

There are a lot of Texas Instruments ADC0838CIWM/NOPB ADC applications.

• Medical Imaging
• Instrumentation and test equipment
• Wireless and wired broadband communications
• 4-channel data acquisition
• Spectrum Analysis
• GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
• Displaying
• Data Acquisition Systems
• Scientific instruments.
• High Speed Data Acquisition