BQ24041DSQR Overview

There is a package for Tape & Reel (TR) in which it can be found.We've included it in the 10-WFDFN Exposed Pad package so that it's easier to use.Mounting type for the device is Surface Mount.It is recommended that the temperature be set to 0°C~125°C TJ in order to ensure reliable performance.In order to operate this device, an analog IC of POWER SUPPLY SUPPORT CIRCUIT must be used.The device requires Constant - Programmable current to charge.The related parts of the base part number BQ24041 can be found by following the order of the base part number.It contains a total of 10 terminations.It is equipped with 10 pins.As long as it is charged at maximum current, it will be rated as 1A.It requires pins 10 to function.The number of available channels is 1.Devices require 28V as their maximum supply voltage.It should be able to run off a battery of 5V.In order for the device to operate properly, the supply voltage should not exceed 6.45V.When the output voltage is 4.2V, high efficiency is possible.In this case, the output current of the device is set to 800mA.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.A supply voltage of 4.75V is suitable for it, because it can operate with a low supply voltage.The part's power supply is set to a value of 4.5/28V.A minimum input voltage of 3.5V volts is required for this device.

BQ24041DSQR Features

1 channels
Power Management Circuits subcategory
10-WFDFN Exposed Pad package

BQ24041DSQR Applications

There are a lot of Texas Instruments
BQ24041DSQR Battery Chargers ICs applications.

• Golf carts
• Forklift
• Pallet jacks
• Personnel carriers
• Maintenance shops
• Rental fleets
• Truck dealers
• Floor scrubber
• Material handling
• Man lift