CD40174BPWR Overview

The package is in the form of 16-TSSOP (0.173, 4.40mm Width). It is contained within the Tape & Reel (TR)package. T flip flop uses Non-Invertedas its output configuration. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 3V~18V volts, it operates. In this case, the operating temperature is -55°C~125°C TA. D-Typeis the type of this D latch. FPGAs belonging to the 4000Bseries contain this type of chip. It should not exceed 16MHzin terms of its output frequency. There are 1 elements in it. There is a consumption of 4μAof quiescent energy. Currently, there are 16 terminations. D latch belongs to the CD40174 family. It is powered by a voltage of 5V . Input capacitance of this device is 5pF farads. There is an electronic part mounted in the way of Surface Mount. Basically, it is designed with a set of 16 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is part of the FF/Latchesbase part number family. An electronic part designed with 6bits is used in this application. For normal operation, the supply voltage (Vsup) should be above 3V. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. 6input lines are available for you to choose from.

CD40174BPWR Features

Tape & Reel (TR) package
4000B series
16 pins
6 Bits

CD40174BPWR Applications

There are a lot of Texas Instruments CD40174BPWR Flip Flops applications.

• Latch
• Pattern generators
• Data storage
• Shift Registers
• Buffered Clock
• Frequency division
• High Performance Logic for test systems
• Communications
• Computing
• Modulo – n – counter