CD4051BPW Overview

Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tube. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 8:1. Temperatures around -55°C~125°C TA are extended for operation. Total terminations are 16. High-quality output is provided by the electronic component's 8 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. There are 1 circuits in this multiplexer. Try searching with CD4051 if you're looking for variants. There is 240Ohm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 20V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 3V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 80nA current would be sufficient. If put voltage greater than 9V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 2.5V. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. 18V operating voltages are supported by the electronic component. It is possible to operate 8 inputs. A 20MHz-bandwidth can be used for data transfer.

CD4051BPW Features

8 Channels
80nA Supply Current
Bandwidth: 20MHz

CD4051BPW Applications

There are a lot of Texas Instruments
CD4051BPW Analog Switches & Multiplexers ICs applications.

• Transmit
• Low-Voltage
• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems