CD4052BNSR Overview

Packed in 16-SOIC (0.209, 5.30mm Width), the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Cut Tape (CT) is used. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. Temperatures around -55°C~125°C TA are extended for operation. A total of 16 terminations have been recorded. As a result of its 4 channels, this electronic component provides high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. An electrical component of this type can be found in the 16 series. The analog switch ics are built using SP4T switching circuits. The multiplexer consists of 2 circuits. Using the CD4052 search parameter, you can discover variants of the switch. Analog switches have 240Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 20V to the switch device in normal circumstances. Analogue multiplexers of the Dual, Single supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 3V. For this digital switch to work, 80nA current would suffice. For this switch, a dual supply voltage is feasible, but it must not exceed 9VFor dual power supplies, a voltage of at least 2.5V should be attached. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. There are SEPARATE OUTPUT outputs on this analog switch ic. It can operate from 18V operating voltages. Among the inputs that can be operated are the 8 inputs. In 25MHz-bandwidths, data can be transferred. It can conduct 4-bit signals.

CD4052BNSR Features

4 Channels
Switch Circuit: SP4T
80nA Supply Current
Bandwidth: 25MHz
4-Bit

CD4052BNSR Applications

There are a lot of Texas Instruments CD4052BNSR Analog Switches & Multiplexers ICs applications.

• Public switching systems
• Battery-powered systems
• DVD-R
• Audio signal routing
• Fault Tolerant Systems
• SDH
• Fiber to the Home
• Automatic test equipment
• Voice over IP/DSL – Integrated Access Devices, Smart
• E1 Network Equipment