Welcome to Hotenda.com Online Store!

logo
userjoin
Home

CD4053BM96E4

CD4053BM96E4

CD4053BM96E4

Texas Instruments

SPDT 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4053 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)

SOT-23

CD4053BM96E4 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 6 Weeks
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 141.690917mg
Operating Temperature -55°C~125°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 240Ohm
Subcategory Multiplexer or Switches
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 3
Supply Voltage 5V
Terminal Pitch 1.27mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number CD4053
Output SEPARATE OUTPUT
Pin Count 16
Qualification Status Not Qualified
Operating Supply Voltage 18V
Power Supplies 5/15V
Number of Channels 2
Number of Circuits 3
Max Supply Voltage 20V
Min Supply Voltage 3V
Analog IC - Other Type SINGLE-ENDED MULTIPLEXER
Operating Supply Current 80nA
Nominal Supply Current 100μA
Propagation Delay 20 ns
Turn On Delay Time 720 ns
Input Voltage (Min) -0.5V
Logic Function Demultiplexer, Multiplexer
Input Voltage (Max) 20.5V
Number of Inputs 6
Voltage - Supply, Single/Dual (±) 3V~20V ±2.5V~9V
Supply Type Dual, Single
Bandwidth 30MHz
Neg Supply Voltage-Nom (Vsup) -5V
Turn-Off Delay Time 450 ns
Max Dual Supply Voltage 10V
On-State Resistance (Max) 240Ohm
Min Dual Supply Voltage 1.5V
Multiplexer/Demultiplexer Circuit 2:1
Off-state Isolation-Nom 40 dB
Current - Leakage (IS(off)) (Max) 100nA
Channel Capacitance (CS(off), CD(off)) 0.2pF 9pF
On-state Resistance Match-Nom 15Ohm
Switch Circuit SPDT
Channel-to-Channel Matching (ΔRon) 5 Ω
Crosstalk -40dB @ 6MHz
Switching BREAK-BEFORE-MAKE
Normal Position NC
Signal Current-Max 0.01A
Height 1.75mm
Length 9.9mm
Width 3.91mm
Thickness 1.58mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $0.537195 $0.537195
10 $0.506788 $5.06788
100 $0.478101 $47.8101
500 $0.451039 $225.5195
1000 $0.425508 $425.508
CD4053BM96E4 Product Details

CD4053BM96E4 Overview


Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -55°C~125°C TA. 16 terminations have been made so far. This electronic part offers high-quality output due to its 2 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. SPDT switching circuits are used in these analog switch ics. It consists of 3 circuits. Look for analog switch ic variants by searching with CD4053. Analog switches have 240Ohm internal resistance. The datasheets for the 16 pins explain the functions. There is a standard Multiplexer or Switches analogue multiplexer here. A voltage higher than 20V should not normally be supplied to the switches. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage the electronic part should receive is 3V. It would be sufficient to run this analogue multiplexer with 80nA current. Despite this switch device's dual supply capability, its voltage should not exceed 10V. The voltage should be at least 1.5V if you are using dual power supplies. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. It can operate from 18V operating voltages. Operating 6 inputs is required. It is possible to transfer data over a 30MHz-bandwidth.

CD4053BM96E4 Features


2 Channels
Switch Circuit: SPDT
80nA Supply Current
Bandwidth: 30MHz

CD4053BM96E4 Applications


There are a lot of Texas Instruments CD4053BM96E4 Analog Switches & Multiplexers ICs applications.

  • DSLAMs
  • Multi-Line E1 Interface Cards
  • Medical Instrumentation
  • E1 Multiplexer
  • Power routing
  • Access Concentrators
  • ATM
  • FTTH
  • Digital Cross-Connects
  • ISDN NT1/TA

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News