Welcome to Hotenda.com Online Store!

logo
userjoin
Home

DG2026DQ-T1-E3

DG2026DQ-T1-E3

DG2026DQ-T1-E3

Vishay Siliconix

48ns, 33ns SPDT 4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG2026 10 Pins 1nA 3V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

SOT-23

DG2026DQ-T1-E3 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins 10
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2013
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 10
Resistance 4Ohm
Terminal Finish Matte Tin (Sn)
Subcategory Multiplexer or Switches
Max Power Dissipation 320mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number DG2026
Pin Count 10
Number of Outputs 4
Power Supplies 3/5V
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1.8V
Operating Supply Current 10nA
Nominal Supply Current 10nA
Power Dissipation 320mW
Max Supply Current 1μA
Turn On Delay Time 35 ns
Number of Inputs 2
Supply Type Single
Turn-Off Delay Time 38 ns
On-State Resistance (Max) 4Ohm
Multiplexer/Demultiplexer Circuit 2:1
Off-state Isolation-Nom 78 dB
Current - Leakage (IS(off)) (Max) 1nA
Channel Capacitance (CS(off), CD(off)) 14pF
Switch Circuit SPDT
Switch Time (Ton, Toff) (Max) 48ns, 33ns
Charge Injection 79pC
Crosstalk -82dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 59ns
Voltage - Supply, Single (V+) 1.8V~5.5V
Height Seated (Max) 1.1mm
Length 3mm
Width 3mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
DG2026DQ-T1-E3 Product Details

DG2026DQ-T1-E3 Overview


As the electronic part is packed in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Extended operating temperature around -40°C~85°C TA. In total, 10 terminations have occurred. The electronic part provides high-quality output because it has 1 channels. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. There are 10 pins injected into the electronic part body. The analog switch ics are built using SPDT switching circuits. Use DG2026 to search for variants of the digital switches. It has an internal resistance of 4Ohm. Datasheets for 10 pin functions are available upon request. There is Multiplexer or Switches analog multiplexer like this in the world. Users should never supply a voltage higher than 5.5V to a switch device. Digital switch that provides Single power at a cost-effective price. 1.8V is the lowest voltage that should be fed to the electronic electronic part. For this digital switch to work, 10nA current would suffice. This analog switch requires a voltage of 1.8V~5.5V to drain from a single voltage supply. Put voltage above 1μA on the multiplexer to cause damage. The electrical component supports 2 inputs. There are 4 outputs on the analogue multiplexer.

DG2026DQ-T1-E3 Features


1 Channels
Switch Circuit: SPDT
10nA Supply Current

DG2026DQ-T1-E3 Applications


There are a lot of Vishay Siliconix DG2026DQ-T1-E3 Analog Switches & Multiplexers ICs applications.

  • High-Voltage
  • Voice over IP/DSL – Integrated Access Devices, Smart
  • Private Branch Exchange (PBX)
  • Precision test equipment
  • Avionics
  • Communication systems
  • Imaging
  • Microwave transmission systems
  • Frame Relay Equipment
  • Audio/video switches

Related Part Number

MAX4968CCM+T
BU4051BCF-BZE2
MAX314LCSE+T
TS5A23160DGSTE4
TS5A3157DCKRG4
MAX4599EXT+TG50
MC74LVX8053M
CD4051BPWRG4

Get Subscriber

Enter Your Email Address, Get the Latest News