CD4067BM96 Overview

As the electronic part is packed in 24-SOIC (0.295, 7.50mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 16:1 represents the number of circuits. Operating temperature extended to -55°C~125°C TA. 24 terminations have been made so far. A high-quality output is provided by the electrical component's 1 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. An electrical component like this is included in the 24 series. It consists of 1 circuits. CD4067 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 240Ohm. To find out what the functions of 24 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 18V. Analog switch ics with Single supply type are cost-effective. 3V is the lowest voltage that should be fed to the electronic electronic part. This digital switch can be operated with a current of 80nA. This analog switch requires a voltage of 3V~18V to drain from a single voltage supply. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. There are 14MHz bandwidths for data transfer. It can conduct in a 16-bit manner.

CD4067BM96 Features

1 Channels
80nA Supply Current
Bandwidth: 14MHz
16-Bit

CD4067BM96 Applications

There are a lot of Texas Instruments CD4067BM96 Analog Switches & Multiplexers ICs applications.

• Private Branch Exchange (PBX)
• Audio/video switches
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Low-Voltage
• Fault Tolerant Systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• Avionics and Military Systems
• FTTH
• Automatic test equipment
• RGB switches