CD74AC175NSRG4 Overview
It is packaged in the way of 16-SOIC (0.209, 5.30mm Width). It is contained within the Tape & Reel (TR)package. This output is configured with Differential. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 1.5V~5.5V volts, it operates. In this case, the operating temperature is -55°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74ACseries contain this type of chip. In order for it to function properly, its output frequency should not exceed 100MHz. A total of 1elements are contained within it. As a result, it consumes 8μA quiescent current and is not affected by external forces. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. This D latch belongs to the family of 74AC175. A voltage of 3.3V is used to power it. Its input capacitance is 10pF farads. ACis the family of this D flip flop. There is an electronic component mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. This device's clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. Flip flops designed with 4bits are used in this part. 5.5Vis the maximum supply voltage (Vsup). As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. It runs on 3.3/5Vvolts of power. This input has 4lines.
CD74AC175NSRG4 Features
Tape & Reel (TR) package
74AC series
16 pins
4 Bits
3.3/5V power supplies
CD74AC175NSRG4 Applications
There are a lot of Texas Instruments CD74AC175NSRG4 Flip Flops applications.
- Data Synchronizers
- Balanced Propagation Delays
- ESCC
- Storage Registers
- Circuit Design
- Buffered Clock
- Automotive
- Divide a clock signal by 2 or 4
- ESD protection
- Data transfer
